MENTOR MEN 322.611 - Knob, øA 31 mm, ød 6 mm, black
24.58 EUR
Detailed sheet with complete information, compare prices and find the features for PRODUCTNAME, at the price of PRICE CURRENCY; classified in the category CATEGORY NAME; this product is sold by SELLER NAME and manufactured by MANUFACTURER NAME.
Plastic adjusting knob with set screw fixing
• Material: ABS
• Suitable for high torque transfers
• ØA: 31 mm
• Ød: 6 mm
• ØC: 42 mm
• B: 27 mm
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Plastic adjusting knob with set screw fixing
• Material: ABS
• Suitable for high torque transfers
• ØA: 31 mm
• Ød: 6 mm
• ØC: 42 mm
• B: 27 mm
Delivery Cost: 9.95 EUR
Availability: in stock
Delivery Time: 4-5 business days
Condition: new
Comparison of Similar Products
MENTOR ZEIGER 28-6 SW - Pointer knob with marker for 6-mm axis IMPORTANT: Please order c
13.46 EUR
Rotary knob with marker for 6-mm axisIMPORTANT: Please order cover separately!
MENTOR KNOPF 28M-6 SW - Rotary knob with marker for 6-mm axis NOTE: please order cover s
13.36 EUR
Rotary knob with marker for 6-mm axisNOTE: Please order cover separately!
MENTOR ZEIGER 20-6 SW - Pointer knob with marker for 6-mm axis IMPORTANT: Please order c
12.95 EUR
Rotary knob with marker for 6-mm axisIMPORTANT: Please order cover separately!
MENTOR KNOPF 20M-6 SW - Rotary knob with marker for 6-mm axis NOTE: please order cover s
13.41 EUR
Rotary knob with marker for 6-mm axisThe cross-cut collets in the knob body are pressed around the full circumference of the potentiometer/switch nuts with a secure and non-slip fit by tightening the hexagon nut. The shiny, conical knob body is roughly notched around the circumference for secure operation. The collet chuck is sealed by the cover.
Please order cover separately!
MENTOR KNOPF 14M-6 SW - Rotary knob with marker for 6-mm axis NOTE: please order cover s
12.64 EUR
Rotary knob with marker for 6-mm axisThe cross-cut collets in the knob body are pressed around the full circumference of the potentiometer/switch nuts with a secure and non-slip fit by tightening the hexagon nut. The shiny, conical knob body is roughly notched around the circumference for secure operation. The collet chuck is sealed by the cover.
Please order cover separately!
MENTOR KNOPF 28-6 SW - Rotary knob without marker for 6-mm axis NOTE: please order cove
13.67 EUR
Rotary knob without marker for 6-mm axisPlease order cover separately!
OKW TK-40-6 SW - Potentiometer knob Ø 40 mm, 6.35-mm axle, TOP-KNOBS, black
14.91 EUR
Potentiometer knob with screw fixing.Unique, aesthetically sophisticated knob design. Give your devices a modern, contemporary appearance by selecting one of these markers aligned to the application in question. The shaft arm is positioned further back, so that external potentiometer nuts are covered. The screw fixings remain invisible thanks to the marking elements.
Potentiometer knob and marking elements to be ordered separately.
For shaft 6.35 mm in diameter
Knob: Ø 40 mm
Height: 16 mm
Colour: black
MENTOR KNOPF 28-6 AL - Rotary knob without marker for 6-mm axis NOTE: please order cove
19.36 EUR
Aluminium rotary knob with collet fixture without marker for 6-mm axis.Anodised aluminium colours.
Please order cover separately.
MENTOR KNOPF 48-6 SW - Rotary knob without marker for 6-mm axis NOTE: please order cove
15.89 EUR
Rotary knob without marker for 6-mm axisPlease order cover separately!
MENTOR KNOPF 20-6 AL - Rotary knob without marker for 6-mm axis NOTE: please order cove
25.99 EUR
Rotary knob without marker for 6-mm axisThe cross-cut collets in the knob body are pressed around the full circumference of the potentiometer/switch nuts with a secure and non-slip fit by tightening the hexagon nut. The shiny, conical knob body is roughly notched around the circumference for secure operation. The collet chuck is sealed by the cover.
Please order cover separately!
MENTOR KNEBEL 25-6 SW - Toggle with marker for 6-mm axis NOTE: please order cover separa
13.26 EUR
Rotary knob with marker for 6-mm axisMatching lid: LID 14M xx
MENTOR MEN 270.6 - Bow-Type Handle made of Steel
15.69 EUR
Bow-Type Handle made of Steel, surface: chromium plated, length A: 100mmBow-type handles with chrome-plated mounting washers. These ensure a flush seating of the handle, even in the case of large mounting holes. The handles are suitable for pulling, pushing and lifting actions in appliance and apparatus engineering.
MENTOR KNOPF 15 SW - Rotary knob with marker for 6-mm axis
12.01 EUR
Collet knob, conical, with marker for 6-mm axisThe collet chuck effects the connection between the knob and the axis around the full circumference and not just at one point.
Please order matching knob cover with order.
MENTOR KNOPF 20-6 SW - Rotary knob without marker for 6-mm axis NOTE: please order cove
12.74 EUR
Rotary knob without marker for 6-mm axisThe cross-cut collets in the knob body are pressed around the
full circumference of the potentiometer/switch nuts with a secure and non-slip fit by tightening
the hexagon nut. The shiny, conical knob body is roughly notched around the circumference for secure
operation. The collet chuck is sealed by the cover.
Please order cover separately!
MENTOR MEN 1216.1013 - Light guide system 150 mm, ø 6 mm, transparent
11.97 EUR
The housing for the light guide rod is held in place on the printed board via two press-in lugs. Furthermore, the housings are designed to accommodate Ø 2 mm and Ø 3 mm light guides, i.e. flexible 3000 µm PUR fibres, 2000 µm PMMA fibres and 1000 µm PMMA/PE fibres with a black coating can be used. The light guides are used in conjunction with SMD TOPLEDs. Housing, light guide and the white lens are supplied unassembled.• Design: flexible
• Length: 150 mm
• Light guide ø: 3 mm
• Lens ø: 6 mm
• Lens colour: transparent
MENTOR KNOPF 14-6 SW - Rotary knob without marker for 6-mm axis NOTE: please order cove
12.17 EUR
Rotary knob without marker for 6-mm axisThe cross-cut collets in the knob body are pressed around the full circumference of the potentiometer/switch nuts with a secure and non-slip fit by tightening the hexagon nut. The shiny, conical knob body is roughly notched around the circumference for secure operation. The collet chuck is sealed by the cover.
Please order cover separately!
MENTOR MEN 1280.1020 - Light guides 2-way 6 mm, spherical ø 3 mm
10.7 EUR
With these light guides signalling can be transferred by SMD TOPLEDs or SMD CHIPLEDs from the printed circuit board to the front panel.Assembly is done simply by pressing them into the front panel bore hole.
• Design: horizontal
• Head shape: spherical
• Light guide length: 6 mm
• Light guide 1 head height: 2.54 mm
• Light guide 2 head height: 7.62 mm
• Head ø: 3 mm
• Grid spacing: 2.54 mm
HAMMOND MANUFACTURING 1590LB - aluminum casing, 1590 L, 50,6 x 50,5 x 31 mm, aluminum
17.6 EUR
"- With lid and cover screws
- Designed to meet IP54 (see gasket accessory to meet IP66)
- Unpainted version is vibra finished for a smooth surface with no sharp edges
- Black version is painted with tough polyester powder paint for a lasting finish
OKW TK-24-6 SW - Potentiometer knob Ø 24 mm, 6-mm axle, TOP-KNOBS, black
13.72 EUR
Potentiometer knob with screw fixing.Unique, aesthetically sophisticated knob design. Give your devices a modern, contemporary appearance by selecting one of these markers aligned to the application in question. The shaft arm is positioned further back, so that external potentiometer nuts are covered. The screw fixings remain invisible thanks to the marking elements.
Potentiometer knob and marking elements to be ordered separately.
For shaft 6 mm in diameter
Knob: Ø 24 mm
Height: 16 mm
Colour: black
MENTOR MEN 1271.2010 - Light guide 10-way 6.9 mm, ø 2 mm, horizontal
10.97 EUR
This single-row light guide system with a grid dimension of 2.54 mm is held in place on the printed board with fixing pins. The light guides are used in conjunction with SMD Mini TOPLEDs. The light is led via a light guide of Ø 2 mm parallel with the printed board to the front panel.• Design: horizontal
• Light guide length: 6.9 mm
• Light guide quantity: 10-way
• Light guide ø: 2 mm
• Grid spacing: 2.54 mm
MENTOR MEN 3270.0553 - Bow-Type Handle made of Steel
15.48 EUR
Bow-Type Handle made of Steel, surface powder coated black, length A: 55mmBow-type handles with chrome-plated mounting washers. These ensure a flush seating of the handle, even in the case of large mounting holes. The handles are suitable for pulling, pushing and lifting actions in appliance and apparatus engineering.
MENTOR MEN 3270.0883 - Bow-Type Handle made of Steel
15.27 EUR
Bow-Type Handle made of Steel, surface powder coated black, length A: 88mmBow-type handles with chrome-plated mounting washers. These ensure a flush seating of the handle, even in the case of large mounting holes. The handles are suitable for pulling, pushing and lifting actions in appliance and apparatus engineering.
MENTOR MEN 3270.1003 - Bow-Type Handle made of Steel
15.89 EUR
Bow-Type Handle made of Steel, surface powder coated black, length A: 100mmBow-type handles with chrome-plated mounting washers. These ensure a flush seating of the handle, even in the case of large mounting holes. The handles are suitable for pulling, pushing and lifting actions in appliance and apparatus engineering.
MENTOR MEN 3277.1003 - Bow-Type handle made of Aluminium
18.32 EUR
Bow-Type handle made of Aluminium, surface: black anodized, length A: 100mmBow-type handle made from flat-oval profile aluminium for mechanical, appliance and apparatus engineering.
MENTOR MEN 3277.1203 - Bow-Type handle made of Aluminium
16.56 EUR
Bow-Type handle made of Aluminium, surface: black anodized, length A: 120mmBow-type handle made from flat-oval profile aluminium for mechanical, appliance and apparatus engineering.
MENTOR MEN 3277.0553 - Bow-Type handle made of Aluminium
16.14 EUR
Bow-Type handle made of Aluminium, surface: black anodized, length A: 55mmBow-type handle made from flat-oval profile aluminium for mechanical, appliance and apparatus engineering.
MENTOR MEN 3277.0883 - Bow-Type handle made of Aluminium
17.5 EUR
Bow-Type handle made of Aluminium, surface: black anodized, length A: 88mmBow-type handle made from flat-oval profile aluminium for mechanical, appliance and apparatus engineering.
MENTOR MEN 3268.1303 - Equipment Handle made of Aluminium
17.34 EUR
"Equipment Handle made of Aluminium, surface: black anodized, length A: 120mm, Standard type for 19"" racks and devices. The handles are suitable for handling higher loads with pulling, pushing and lifting actions."
MENTOR MEN 3268.1403 - Equipment Handle made of Aluminium
18.53 EUR
"Equipment Handle made of Aluminium, surface: black anodized, length A: 180mm, Standard type for 19"" racks and devices. The handles are suitable for handling higher loads with pulling, pushing and lifting actions."
MENTOR MEN 3268.1103 - Equipment Handle made of Aluminium
15.79 EUR
"Equipment Handle made of Aluminium, surface: black anodized, length A: 55mm, Standard type for 19"" racks and devices. The handles are suitable for handling higher loads with pulling, pushing and lifting actions."
OKW TK-20-6 SW - Potentiometer knob Ø 20 mm, 6-mm axle, TOP-KNOBS, black
13.46 EUR
Potentiometer knob with screw fixing.Unique, aesthetically sophisticated knob design. Give your devices a modern, contemporary appearance by selecting one of these markers aligned to the application in question. The shaft arm is positioned further back, so that external potentiometer nuts are covered. The screw fixings remain invisible thanks to the marking elements.
Potentiometer knob and marking elements to be ordered separately.
For shaft 6 mm in diameter
Knob: Ø 20 mm
Height: 16 mm
Colour: black
FISCHER ELEKTRONIK ICK BGA 31 X 31 - Heat sink 31mm 18.6 K/W black anodised
11.4 EUR
Particularly suited for Heatsink dimensions match the respective BGA type
OKW TK-16-6 SW - Potentiometer knob Ø16 mm, 6-mm axle, TOP-KNOBS, black
13.21 EUR
Potentiometer knob with screw fixing.Unique, aesthetically sophisticated knob design. Give your devices a modern, contemporary appearance by selecting one of these markers aligned to the application in question. The shaft arm is positioned further back, so that external potentiometer nuts are covered. The screw fixings remain invisible thanks to the marking elements.
Potentiometer knob and marking elements to be ordered separately.
For shaft 6 mm in diameter
Knob: Ø 16 mm
Height: 16 mm
Colour: black
MENTOR MEN RTD 2400R - 4-fold LED module, red, Ø 2mm
12.64 EUR
LED module, 4-way from MENTOR,Ø 2 mm, stackable, horizontal.
2 V/20 mA
Print grid 2.54/5.08 m
Colour: red
Depth: 13.6 mm
Height: 11.8 mm
Width: 5.0 mm
G&G 17084 - Replacement tape for TZe-611
19.2 EUR
G&G Image labelling tape RL-B-T611P-BK/YE Replacement for Brother TZe-611 (6 mm/8 m, laminated) black on yellowFor P-touch 200, 210E, 220, 300, 310, 340, 340C, 350, 540, 540C, 550, 900F, 1000, 1010, 1090, 1200, 1200P, 1230PC, 1250, 1250J, 1250S, 1260VP, 1280, 1280DT, 1290, 1290DT, 1290VP, 1750,18R, 1800, 1800E, 1830VP, 1850, 1950VP, 2030VP, 2100VP, 2400, 2400E, 2420PC, 2430PC, 2450, 2450DX, 2460, 2470, 2480, 2500PC, 2700VP, 2730VP, 3600, 7100VP, 7500VP, 7600VP, 9200PC, 9200DX, 9400, 9500PC, 9600, 9700PC, 9800PCN, D200, D200BW, D200VP, D200BWVP, D210, D210VP, D400, D400VP, D450VP, D600VP, D800W, E100, E100VP, E110, E110VP, E300VP, E500VP, E550WVP, H105, H105WB, H110, H200, H300, H300LI, H500, H500LI, P300BT, P700, P710BT, P750W, P900W, P950NW, RL700S
MENTOR MEN 474.91 - Knob, øA 50 mm, ød 10 mm, black
19.87 EUR
Plastic knob with collet fastening• Material: ABS
• Suitable for high torque transfers
• ØA: 50 mm
• Ød: 10 mm
• ØC: 58 mm
• B: 35.5 mm
MENTOR MEN 1216.1001 - Light guide 150 mm, ø 5 m, flexible, 1000 µm
10.97 EUR
The housing for the light guide rods is held in place on the printed board via two press-in lugs. Furthermore, the housings are designed to accommodate Ø2 mm light guides, i.e. 1000 µm fibres with a black coating are used.The light guide is used in conjunction with SMD LEDs. Housing, light guide and lens are supplied unassembled.
• Design: flexible
• Length: 150 mm
• Head ø: 5 mm
• Bore ø: 4 mm
The light guide is held in place on the printed board via two press-in lugs.
MENTOR MEN 2816.2004 - Double LED strip, red, Ø 2mm, 4-column
15.11 EUR
4-row dual LED strip from MENTOR,Ø 2 mm, stackable, horizontal.
2 V/20 mA
Print grid 2.54/5.08 m
Colour: red
Depth: 13.7 mm
Height: 8.6 mm
Width: 2.5 mm (x number of rows)
MENTOR MEN 2350.2031 - LED module, red, Ø 5mm, axis height 4mm
10.97 EUR
LED module from MENTOR,Ø 3 mm, stackable, horizontal.
Shaft height: 4 mm
2.25 V/20 mA
Print grid 2.54/5.08 m
Colour: red
Depth: 10.0 mm
Height: 8.0 mm
Width: 6.0 mm